- Includes Raspberry Pi 2 (RPi2) Model B Quad-Core 900 MHz 1 GB RAM
- 8 GB Micro SD Card pre-loaded with NOOBS, CanaKit WiFi Adapter, CanaKit 2.5A Power Supply with 5 feet Micro USB Cable and Noise Filter (UL Listed)
- High Quality Raspberry Pi 2 Case, Premium Quality 6.5 feet HDMI Cable, Heat Sink
- CanaKit GPIO to Breadboard Interface Board, Ribbon Cable, Breadboard, Jumper Wires, GPIO and Resistor Colors Quick Reference Cards
- RGB LED, 8 x LEDs (Blue/Red/Yellow/Green), 15 x Resistors, 2 x Push Button Switches
NOTE: The pre-programmed 8 GB MicroSD card may appear as 1 GB when inserted into a PC as it is pre-partitioned. The remaining space can be expanded as desired.
The CanaKit Raspberry Pi Ultimate Starter Kit is covered by CanaKit's 1-Year Manufacturer Warranty offering hassle-free replacements.
An exclusive Ultimate Starter Kit from CanaKit that includes the fastest model of the Raspberry Pi family - The Raspberry Pi 2 Model B and everything you need to get up and running within minutes in the exciting world of Raspberry Pi!
The Ultimate Starter Kit includes everything in the Starter Kit plus all the components needed to start using the GPIO port of the Raspberry Pi 2.
The kit includes a Raspberry Pi 2 case as well as the recommended Raspberry Pi 8 GB MicroSD Card pre-loaded with NOOBS. Just Plug and Play!
The kit also includes a CanaKit 2.5A Micro USB power supply (UL Listed) specially designed and tested for the Raspberry Pi 2. This power supply incorporates a noise filter to provide the highest stability.
- Raspberry Pi 2 (RPi2) Model B Quad-Core 900 MHz 1 GB RAM
- 8 GB MicroSD Card - Raspberry Pi Recommended MicroSD Card with NOOBS
- CanaKit WiFi Adapter / Dongle (RT5370 chipset)
- CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi 2 (5 feet cable)
- High Quality Raspberry Pi 2 Case
- Premium Quality HDMI Cable with CEC support (6.5 feet cable)
- Heat Sink
- GPIO and Resistor Colors Quick Reference Cards
- CanaKit GPIO to Breadboard Interface Board
- GPIO Ribbon Cable
- 32 x Jumper Wires
- RGB LED
- 2 x Red LEDs
- 2 x Green LEDs
- 2 x Yellow LEDs
- 2 x Blue LEDs
- 2 x Push Button Switches
- 10 x 220 Ohm Resistors
- 5 x 10K Ohm Resistors