Driver board interfaces
1.Power Supply(5~12V 2A)
7.TTL Signal 50Pin
8.LVDS Signal 1/2 ch 6bit 8bit
9.12V Backlight 10.Inverter Connector
This controller board support Automatically Switch to AV2(Reversing View camera). Please connected ACC to 12V.
The five buttons are as follows: S1 = Power, S2=Menu/Select, S3=Up, S4=Down, S5=Video Source Select
1* HDMI+VGA+2AV Controller Board VS-TY2662-V1 (Support Automatically switch to AV2)
1* 7inch 800*480 Lcd Panel AT070TN92
1* 5-button switch and adjustment panel
Installation Method: http://youtu.be/E_YjNSn3sz0
(Power Supply is NOT included)
If you want to conect this screen to your Raspberry Pi,you need a AV Cable or a HDMI Cable,or if you have a HDMI TO VGA CABLE For Raspberry pi,you can use a VGA Cable to connect your Raspberry pi to this Screen.
(There is a sticker on the LCD screen. Please peel off before use.)
User Manual: https://s3.amazonaws.com/ttbox/7lcd.zip